Axis Movement |
|
There may be several reasons for one of the workplanes not to move according to the instructions given by the CNC-system... |
|
HF Spindles |
|
Several problems may be referred to the HF-spindles.Problems in the bearings, the collet or the cooling unit may cause severe malfunction or lead to inconsitent hole or routing quality... |
|
Drilling/Routing |
|
The drilling quality may be affected in several ways, but generally, insuffcient drilling quality is caused by one of the two problems described below... |
|
Keyboard/Joystick |
|
Normally, neither keyboard or joystick needs any special maintenance or adjustments apart from normal cleaning as per the instructions given in the Mape manual... |
|
Tool-Change |
|
The Mape tool-change system consists of a tool-magazine (multipla of 20 tools/unit) combined with an electromechanical measuring device... |
|
Laser Measuring System |
|
The Mape Laser Measuring System is a fully automatic device which is measuring tool diameters and run-out failures down to micron-level.... |
|
Tips/Misc. |
|
To get the best results from your powerful Mape Machine, you should keep it clean, in a steady ambient temperature..... |
|
